Star-tech-development TSP100 Manuale Utente Scaricare il pdf (Pagina 38)

– 35 –

10-4-3. PU Model (PoweredUSB cable)

When using the PoweredUSB cable, DC 24 V must be supplied to the printer from the system.

Use a power supply for the printer that meets the following requirements.

Power Requirements

(1) Output: DC 24V ± 5%

(2) Current Consumption (DC 24 V at room temperature)

Low-power consumption mode:

Stand-by: Approx. 0.1A

Mean: Approx. 1.0A (at ASCII continuous printing)

Peak: Approx. 5.0A

(at print duty 100%, for 10 seconds or less)

Standard mode:

Stand-by: Approx. 0.1A

Mean: Approx. 1.4A (at ASCII continuous printing)

Peak: Approx. 10.0A

(at print duty 100%, for 10 seconds or less)

To switch between the standard and low-power consumption modes, refer to chapter 11 for

details on the DIP switch settings.

Notes:There is a danger that there will be a large incoming current when turning the printer

back on after turning it off. Therefore, wait at least 5 seconds before turning the

printer back on.

1 2 ... 33 34 35 36 37 38 39 40 41 42

Nessun commento

Star-tech-development TSP100 Manuale Utente Pagina 38